-
2020 Pottinger Novacat 302 mower Only 3 Working Seasons, in Good Condition, Wont Be Faulted, In Perfect Working Order, €13,250 Ex VAT Contact Flor 087 7010657 -
Clean centre point conditioner mower, Very good condition, Low acres, €9,500 Contact Flor 087 7010657 -
Center mounted for even weight distribution 3.16 meter (10ft 4”) cut Hydraulic lifting at the headlands gives plenty ground clearance Two mounting options for optimal overlap with a front mower €12,500 Contact Ger 087 7873105 Contact Sean 087 4706039 -
4332lt Trailed Kvernland mower 2015 with a low acres Fully serviced 10ft6 cut Round discs 1000 speed pto Gyro box head €16,000 Contact Ger 087 7873105 Contact Sean 087 4706039 -
Kverneland e-drill compact and e-drill maxi. These two models allow seedbed preparation, re-compaction and sowing in one pass. The e-drill compact is offered with a hopper capacity of up to 1400 litres, the e-drill maxi up to 2000 litres. Operator-friendly - innovative and precise depth control A parallelogram and a quadruple joint of the e-drill ensure the optimum adjustment of the power harrow and coulterbar for a precise seed application. Important: the adjustment of the power harrow has no impact on the coulterbar respectively the sowing depth. -
The Kverneland Foldable Power Harrow NG-S 101 F35 is the result of effective co-operation between cultivation and seeding experts to construct a “state of the art” strong and effective implement designed for tractors up to 400 hp. This power harrow is available in working widths of 4.5 to 6.0m. The foldable power harrow has the same heavy-duty self-supporting trough design as used on the mounted models and is equipped with the same robust conical bearings and hardened gears. In order to give the NG-S 101 F35 the strongest design and to enable it to withstand the toughest of conditions the upper half of the trough as well as the trough base is made from 10 mm steel plate. The welded conical bearing housings give highest strength to the overall trough. -
Side Mounted Disc Mowers Kverneland offers a rear mounted disc mower series with working widths of 2.40-3.16 m. Kverneland 2600 M series offers a very reliable performance, easy handling and high output at low power requirements. -
Kverneland 3300 series is fitted with the new Kverneland suspension concept called QuattroLink. The new QuattroLink mowers have been designed for even more productivity and to handle tougher conditions than ever. With its´ accurate ground following ability and highly flexible working range QuattroLink provides supreme capacity. QuattroLink provides an accurate tracking ability and a highly flexible working range. The mowing unit is pulled by the 4-arm suspension, fitted onto a fixed carrying arm that allows the mowing unit to float independently over the field, adjusting precisely and instantly to any changes in ground contours. -
High output and low maintenance costs The best crops need the best soil preparation. Ploughing is for the majority of farmers one of the most efficient methods to control weeds, create humus and prepare soil for seeding efficiently. Keeping an eye on the bottom line is equally important. The burial of residues must be perfect and easy to achieve while cost must be minimized: low fuel consumption, low wearing of parts, low lifting capacities, low pull requirements. Comfort in transport and in operations is a must in modern farming. The plough must be robust and lasts long as any profitable investments. Designed for In-Furrow and On-Land operations. Comfortable with lower lift requirements than other brands. The headstock No 300 provides the necessary strength for a smooth reversing. Kverneland unique steel technology! In its on-land configuration the plough’s massive offset (up to 3,85 m) allows the tractor to be positioned exactly to the drivers’ requirements. -
Kverneland 3600 front mounted machines can be used in combination with a variety of mower conditioners, including the 4300 series, 3132 MT, the 5090 MT, or on its own, making these extremely versatile machines. With a working width of 2.80-3.60m, the capacity of these machines is substantial. -
Trailed Mower Conditioners with Centre Pivot Drawbar Including features such as SemiSwing conditioner, low maintenance cutterbar, SuperFloat suspension, BX Auto-Swather belt and FlipOver widespreading, Kverneland 4300 series machines are ready to meet every request with exceptional performance -
The new Kverneland 6250 Plus fixed chamber balers are designed for maximum flexibility in all crop conditions. Perfectly shaped bales, combined with long-lasting reliable performance ensure that the new Kverneland 6250 Plus series will be a profitable investment. -
Kverneland 6500F is the specialist baler for heavy silage conditions. The bale chamber is formed by 18 ribbed profile rollers which ensure maximum bale density and superb bale rotation in all conditions, while power requirement is also kept to a minimum for more efficient operation. -
The latest Kverneland 6700 Plus series balers have multi crop capability and combine profitable high output performance with market leading bale density. The new Plus series models benefit from a host of upgrades designed to boost output and reduce maintenance requirements. The pick-up has been updated with longer tines and wider stripper plates, for improved cleaning. Pick-up and main bale chamber drives are fitted with new high specification HBC chain. The roller crop press has increased lifting for better feeding capacity and incorporates fixed shafts with internal bearings. The 6000 Plus series are leaders in bale density, achieved through Intelligent Density 3D, which allows you to choose the bale density best suited to your crop conditions. -
Kverneland 85140 C is very easy to use. All operations are run hydraulically, and can be controlled from the tractor cab. The tedder comes with a hydraulic adjustment for border tedding, to prevent loss of grass due to ditches or fences. Despite its size, the tedder is very easy to run. Kverbelabd 85140 C is supplied with transport carrier as standard, making it possible to operate the machine in combination with low horsepower tractors. -
Reliable Performance with Smart Transport Solution The Kverneland Models 8590 C and the New 85112 C are carrier frame tedders purpose-built for use with smaller tractors. The wide track width ensures stable running characteristics during road transport. Due to the carrier frame concept, the lifting capacity of the tractor is not a limiting factor and it can be operated with tractors starting from 70hp. -
Reliable Performance with Smart Transport Solution The Kverneland Models 8590 C and the New 85112 C are carrier frame tedders purpose-built for use with smaller tractors. The wide track width ensures stable running characteristics during road transport. Due to the carrier frame concept, the lifting capacity of the tractor is not a limiting factor and it can be operated with tractors starting from 70hp. -
A key aim of the Kverneland 863 and 864 is to provide more capacity by shredding the material faster. Flywheel housing and blowing paddles have increased in dimensions to increase performance. This means more material is fed faster into the flywheel, finishing the bale at an impressive pace. -
High Capacity Single Rotor Rakes Kverneland 9542 and 9546 are high performance rakes with a drive system designed to last for a long time. The 3-pt headstock allows the rake to follow the tractor around tight curves. The standard boogie wheels offer perfect ground contour following and minimises the amount of dirt that collects in the swath. Kverneland 9542 and 9546 are fitted with hydraulic height adjustment "HydroLift" as standard. The HydroLift allows you to set the rake to different field conditions. From the tractor cab you can quickly set the raking height to suit the length of stubble or varying ground conditions. -
Heavy Duty Centre Swath Rakes The Kverneland 9580 C, 9584 C and 9590 C Hydro are heavy duty two-rotor rakes with working widths up to 8.0, 8.4 and 9.0m respectively. They are designed for the toughest conditions and feature a high performance oil-bath gearbox and a strong carrier frame. The hydraulically adjustable working and swath width and ability to make sharp turns of up to 80° are important features of these rakes. Due to the Hydro axle Kverneland 9590 C Hydro has a transport height of less than 4.0m, even without detaching the tine arms. The Kerneland 9580 C with newly designed wheel axles provide a transport width below 4m, even with tine arms mounted. On-the-Go Rotor Height Adjustment A ComfortKit is optionally available for 9580 C and standard on 9590 C Pro. This includes a handheld joystick control, where the height of each rotor is controlled electronically and shown on the screen of the control box. -
15 m Working Width The Kverneland 97150 C is designed for high output and heavy use. Four rotors, maintenance-free ProLine gearbox, 15m working width and heavy-duty mainframe design underline its’ potential as a rake for the most demanding customer segment. The special elbow design of the front rotor arms is a unique feature of the Kverneland 97150 C. Raking width can be matched to differing crop characteristics, to obtain an evenly shaped and equally wide swath across the full width. This unique Kverneland design allows for an impressive working range between 9.80 and 15.00m, in fact, unmatched flexibility that only Kverneland offers. -
Flexible, compact and efficient - Compact models are medium sized machines with all the advantages of larger models. Compact models are particularly suited to buildings where space is restricted, due to their reduced dimensions. Easy handling, simple to use, low purchase and running costs yet efficient performance - an ideal solution. These machines feed 30 to 100 cows per hopper filling. The Compact range comes standard with a front right discharge door, but with an extensive list of discharge options the machine can be tailored to your needs. Also standard - ladder, weighing system, straw ring and hydraulic controls direct to tractor. -
As a result of growing farms and shorter weather periods, time has become a valuable factor. Therefore, the DTX combines different operations in one pass to save time. Designed as a mounted one-pass stubble incorporator/soil loosener for tractors in the 200-360hp range, the DTX is extremely versatile. It can be used for first entry with non-inversion tillage or to knock down ploughing whilst loosening down to 40cm. It is also ideally suited to establish oilseed rape straight into stubble as it leaves a very levelled, fine and consolidated seedbed. The DTX also offers very good trash clearance. The front tines are staggered and the rear discs allow a full cut and mix from 2 to 10cm deep. The Kverneland DTX combines the tines (Pro-Lift or LD) with the proven disc section of the short disc harrow Qualidisc Farmer (Ø 520mm). Soil can be loosened with the Pro-Lift or LD tines down to 40cm while the top soil layer up to 10cm is incorporated with the disc sections. Tines and disc segment as well as the roller DD600 are connected in a high quality frame box which allows the operation even in heavy conditions. The DTX is equipped with side deflectors which are well-known from the Qualidisc range. This ensure perfect levelling in all types of conditions -
Amazing strength to weight ratio. Both ED and LD mounted ploughs are strongly built for an efficient low cost ploughing in medium to heavy soil conditions. Thanks to the Kverneland steels and heat treatment technology, these reversible mounted ploughs benefit from an unrivalled durability. -
High speed spreading The Kverneland Exacta TLX GEOSPREAD has almost exactly the same specifications as the Exacta TL GEOSPREAD, but comes with a newly designed CentreFlow system with 8 capacity vanes on each disc for a perfect overlap, no matter how fast you are driving. With 1 metre sections, 4 load cells and a reference sensor, the Kverneland Exacta TLX GEOSPREAD can do high speed spreading under all circumstances. This Exacta TLX GEOSPREAD spreader is ISOBUS compatible and AEF certified. You can operate the spreader in combination with the IsoMatch Tellus PRO, IsoMatch Tellus GO+ or any other ISOBUS compatible tractor terminal. -
The art of round baling took a massive leap forward with the unveiling of FastBale – a revolutionary non-stop round baler wrapper combination that cleverly integrates a pre-chamber with a main chamber and a wrapper. Machine layout is truly innovative with two chambers arranged in series, allowing a number of rollers to be shared. Operating as a pre-chamber, the first section of FastBale produces two-thirds of the bale. As the pre-chamber reaches its preset density, crop flow is diverted into the main bale chamber allowing baling to continue. -
The Power of Simplicity! The iXter A will be added to the Kverneland mounted field sprayer range. The iXter A is available with 800, 1000 and 1200 litre tank capacity in combination with two different boom types: the HOSA aluminium spray boom (12-15m) and the HC boom (18-20-21m). Pumps are available with capacities of 100, 150 and 200 l/min. The iXter A is an easy to operate sprayer with the control panel, chemical inductor, hand wash tank and clean cloth locker all on the same side of the sprayer. Operation can be made via the easy-to-use FlowMate Control spray computer. -
Kverneland iXter B - The Power of Technology The Kverneland iXter B mounted sprayer is the fruit of years of research and development in close collaboration with farmers: this is today the most advanced mounted sprayer range with focus on user friendliness and environmental protection. With iXflow-E individual nozzle control and a completely new iXspray hardware and software platform Kverneland can offer a high tech mounted sprayer with a high level of user friendliness for the professional farmer segment. -
Kverneland iXtrack T3 - made for Farmers, made by Farmers The iXtrack T3 trailed sprayer is developed with focus on a short, low and compact design in combination with intelligent electronics and ease of use. The iXtrack T3 sprayer offers tank sizes of 2600 and 3200 litres. -
The Kverneland M series is a medium-sized power harrow for tractors up to 140HP. It is the lightest model within the Kverneland range of power harrows. Still, the M series offers strength and durability due to the heavy-duty headstock and the self-supporting trough. The optional ‘Quick-Fit’ tine holders and double conical bearings ensure optimum performance. The trough of the M series consists of one bended part which is bolted on top. The design comes along without any welding parts for increased stability. The M series can, therefore, be combined with a seed drill as e.g. the e-drill compact. -
The Kverneland compact disc harrow, Qualidisc Farmer in working width of 2.0 to 6.0m Shallow and deeper cultivation, stubble cultivation, seedbed preparation or cover crop seeding. All these different tasks require excellent penetration, cutting and consolidation quality. The Qualidisc Farmer is the right choice to carry out these operations at high forward speeds of 18 to 20km/h. The Qualidisc Farmer is the lighter version of the Qualidisc Pro for more shallow use, up to 10cm deep. Consequently, the machine is 15% lighter on mounted version and 7% on trailed version, easier to lift, ideal for reducing soil compaction and energy saving as it is lighter to pull. There are 3 different models of the Qualidisc Farmer: Rigid models from 2.00m to 4.00m - up to 200hp Fold models from 4.00 to 6.00m - up to 300hp Trailed models from 4.00 to 6.00m - up to 300hp -
The Kverneland compact disc harrow, Qualidisc Pro in working width of 2.0 to 7.0m Stubble cultivation, seedbed preparation, cover crop seeding, shallow and deeper cultivation, all alike, require excellent penetration, cutting and consolidation quality. The Qualidisc Pro is ready for all these different tasks with powerful and efficient performance. The machine can operate at high forward speeds of 18 to 20km/h maintaining a full cut over the entire working width at a consistent working depth (up to 15cm) in all types of conditions -
Kverneland S Series power harrow Super heavy duty Suitable for up to 250HP 12 rotors 575mm packer with scrapers Rear levelling bar Phone Flor on 087-7010657 -
This is the first front disc mower with an actively driven swath former, designed for both narrow swathing and widespreading. With the option of 3 different swath widths (1.00, 1.15 and 1.30m) and wide spreading up to 2.20m, this machine offers exactly the flexibility that most farmers are looking for. Narrow swaths that will go well in-between the tractor wheels, or wide spreading for fast wilting of crop. Changing between different swath widths is intuitively done in very little time – no tools required. -
The professional solution for all vegetable growers The pneumatic precision seed drill for a large variety of natural, coated or pelleted seeds like, onion, cabbage, spinach, carrot, asparagus and many other types of vegetable, as well as medicinal herbs, flowers and trees. The Miniair Nova is available with rigid frame or as a parallel hydraulic folding model, with working width of 2.5 to 6.5m.The machine can be adjusted to a height of up to 34cm for field, bed or ridged cropping systems via the holes on an adjustment bar on the suspension. The standard gearbox allows seed spacing of 0.9 – 43.4cm. The chain wheels can be changed without the need for tools. -
The Optima V is the perfect seed drill for farmers and contractors who need a machine with various row widths. With the Optima V, the row width is ready in next to no time which ensures a speedy response on changing requirements. Your benefit: a high level of flexibility and less time waste. -
The Kverneland s-drill is the heavy-duty version of the DA. Available in working widths of 3.00, 3.50 and 4.00m, it is a high-performance machine for larger farms and estates.Thanks to the universal coupling triangle, the s-drill can be mounted on existing Kverneland power harrows as well as on other soil preparation tools. A hydraulic coulter bar lifting is available optionally. The mechanical coulter pressure adjustment is standard equipment, whilst the hydraulic version is optional.
NEW SAMCO AGRI STORE NOW OPEN IN TRALEE, CO. KERRY!
Call us today! Limerick 061 396 176 | Kerry 066 711 8331
CONTACT SAMCO AGRI SALES
OPENING HOURS
Monday – Friday 9am to 5pm
