-
Kverneland S Series power harrow Super heavy duty Suitable for up to 250HP 12 rotors 575mm packer with scrapers Rear levelling bar Phone Flor on 087-7010657 -
Clean centre point conditioner mower, Very good condition, Low acres, €9,500 Contact Flor 087 7010657 -
4332lt Trailed Kvernland mower 2015 with a low acres Fully serviced 10ft6 cut Round discs 1000 speed pto Gyro box head €16,000 Contact Ger 087 7873105 Contact Sean 087 4706039 -
Center mounted for even weight distribution 3.16 meter (10ft 4”) cut Hydraulic lifting at the headlands gives plenty ground clearance Two mounting options for optimal overlap with a front mower €12,500 Contact Ger 087 7873105 Contact Sean 087 4706039 -
2020 Pottinger Novacat 302 mower Only 3 Working Seasons, in Good Condition, Wont Be Faulted, In Perfect Working Order, €13,250 Ex VAT Contact Flor 087 7010657 -
Reliable Performance with Smart Transport Solution The Kverneland Models 8590 C and the New 85112 C are carrier frame tedders purpose-built for use with smaller tractors. The wide track width ensures stable running characteristics during road transport. Due to the carrier frame concept, the lifting capacity of the tractor is not a limiting factor and it can be operated with tractors starting from 70hp. -
Side Mounted Disc Mowers Kverneland offers a rear mounted disc mower series with working widths of 2.40-3.16 m. Kverneland 2600 M series offers a very reliable performance, easy handling and high output at low power requirements. -
High speed spreading The Kverneland Exacta TLX GEOSPREAD has almost exactly the same specifications as the Exacta TL GEOSPREAD, but comes with a newly designed CentreFlow system with 8 capacity vanes on each disc for a perfect overlap, no matter how fast you are driving. With 1 metre sections, 4 load cells and a reference sensor, the Kverneland Exacta TLX GEOSPREAD can do high speed spreading under all circumstances. This Exacta TLX GEOSPREAD spreader is ISOBUS compatible and AEF certified. You can operate the spreader in combination with the IsoMatch Tellus PRO, IsoMatch Tellus GO+ or any other ISOBUS compatible tractor terminal. -
Kverneland iXtrack T3 - made for Farmers, made by Farmers The iXtrack T3 trailed sprayer is developed with focus on a short, low and compact design in combination with intelligent electronics and ease of use. The iXtrack T3 sprayer offers tank sizes of 2600 and 3200 litres. -
Kverneland iXter B - The Power of Technology The Kverneland iXter B mounted sprayer is the fruit of years of research and development in close collaboration with farmers: this is today the most advanced mounted sprayer range with focus on user friendliness and environmental protection. With iXflow-E individual nozzle control and a completely new iXspray hardware and software platform Kverneland can offer a high tech mounted sprayer with a high level of user friendliness for the professional farmer segment. -
The Power of Simplicity! The iXter A will be added to the Kverneland mounted field sprayer range. The iXter A is available with 800, 1000 and 1200 litre tank capacity in combination with two different boom types: the HOSA aluminium spray boom (12-15m) and the HC boom (18-20-21m). Pumps are available with capacities of 100, 150 and 200 l/min. The iXter A is an easy to operate sprayer with the control panel, chemical inductor, hand wash tank and clean cloth locker all on the same side of the sprayer. Operation can be made via the easy-to-use FlowMate Control spray computer. -
As a result of growing farms and shorter weather periods, time has become a valuable factor. Therefore, the DTX combines different operations in one pass to save time. Designed as a mounted one-pass stubble incorporator/soil loosener for tractors in the 200-360hp range, the DTX is extremely versatile. It can be used for first entry with non-inversion tillage or to knock down ploughing whilst loosening down to 40cm. It is also ideally suited to establish oilseed rape straight into stubble as it leaves a very levelled, fine and consolidated seedbed. The DTX also offers very good trash clearance. The front tines are staggered and the rear discs allow a full cut and mix from 2 to 10cm deep. The Kverneland DTX combines the tines (Pro-Lift or LD) with the proven disc section of the short disc harrow Qualidisc Farmer (Ø 520mm). Soil can be loosened with the Pro-Lift or LD tines down to 40cm while the top soil layer up to 10cm is incorporated with the disc sections. Tines and disc segment as well as the roller DD600 are connected in a high quality frame box which allows the operation even in heavy conditions. The DTX is equipped with side deflectors which are well-known from the Qualidisc range. This ensure perfect levelling in all types of conditions -
The Kverneland M series is a medium-sized power harrow for tractors up to 140HP. It is the lightest model within the Kverneland range of power harrows. Still, the M series offers strength and durability due to the heavy-duty headstock and the self-supporting trough. The optional ‘Quick-Fit’ tine holders and double conical bearings ensure optimum performance. The trough of the M series consists of one bended part which is bolted on top. The design comes along without any welding parts for increased stability. The M series can, therefore, be combined with a seed drill as e.g. the e-drill compact. -
The Kverneland Foldable Power Harrow NG-S 101 F35 is the result of effective co-operation between cultivation and seeding experts to construct a “state of the art” strong and effective implement designed for tractors up to 400 hp. This power harrow is available in working widths of 4.5 to 6.0m. The foldable power harrow has the same heavy-duty self-supporting trough design as used on the mounted models and is equipped with the same robust conical bearings and hardened gears. In order to give the NG-S 101 F35 the strongest design and to enable it to withstand the toughest of conditions the upper half of the trough as well as the trough base is made from 10 mm steel plate. The welded conical bearing housings give highest strength to the overall trough. -
The Kverneland compact disc harrow, Qualidisc Pro in working width of 2.0 to 7.0m Stubble cultivation, seedbed preparation, cover crop seeding, shallow and deeper cultivation, all alike, require excellent penetration, cutting and consolidation quality. The Qualidisc Pro is ready for all these different tasks with powerful and efficient performance. The machine can operate at high forward speeds of 18 to 20km/h maintaining a full cut over the entire working width at a consistent working depth (up to 15cm) in all types of conditions -
The Kverneland compact disc harrow, Qualidisc Farmer in working width of 2.0 to 6.0m Shallow and deeper cultivation, stubble cultivation, seedbed preparation or cover crop seeding. All these different tasks require excellent penetration, cutting and consolidation quality. The Qualidisc Farmer is the right choice to carry out these operations at high forward speeds of 18 to 20km/h. The Qualidisc Farmer is the lighter version of the Qualidisc Pro for more shallow use, up to 10cm deep. Consequently, the machine is 15% lighter on mounted version and 7% on trailed version, easier to lift, ideal for reducing soil compaction and energy saving as it is lighter to pull. There are 3 different models of the Qualidisc Farmer: Rigid models from 2.00m to 4.00m - up to 200hp Fold models from 4.00 to 6.00m - up to 300hp Trailed models from 4.00 to 6.00m - up to 300hp -
The Kverneland s-drill is the heavy-duty version of the DA. Available in working widths of 3.00, 3.50 and 4.00m, it is a high-performance machine for larger farms and estates.Thanks to the universal coupling triangle, the s-drill can be mounted on existing Kverneland power harrows as well as on other soil preparation tools. A hydraulic coulter bar lifting is available optionally. The mechanical coulter pressure adjustment is standard equipment, whilst the hydraulic version is optional. -
Kverneland e-drill compact and e-drill maxi. These two models allow seedbed preparation, re-compaction and sowing in one pass. The e-drill compact is offered with a hopper capacity of up to 1400 litres, the e-drill maxi up to 2000 litres. Operator-friendly - innovative and precise depth control A parallelogram and a quadruple joint of the e-drill ensure the optimum adjustment of the power harrow and coulterbar for a precise seed application. Important: the adjustment of the power harrow has no impact on the coulterbar respectively the sowing depth. -
The Optima V is the perfect seed drill for farmers and contractors who need a machine with various row widths. With the Optima V, the row width is ready in next to no time which ensures a speedy response on changing requirements. Your benefit: a high level of flexibility and less time waste. -
The professional solution for all vegetable growers The pneumatic precision seed drill for a large variety of natural, coated or pelleted seeds like, onion, cabbage, spinach, carrot, asparagus and many other types of vegetable, as well as medicinal herbs, flowers and trees. The Miniair Nova is available with rigid frame or as a parallel hydraulic folding model, with working width of 2.5 to 6.5m.The machine can be adjusted to a height of up to 34cm for field, bed or ridged cropping systems via the holes on an adjustment bar on the suspension. The standard gearbox allows seed spacing of 0.9 – 43.4cm. The chain wheels can be changed without the need for tools.
NEW SAMCO AGRI STORE NOW OPEN IN TRALEE, CO. KERRY!
Call us today! Limerick 061 396 176 | Kerry 066 711 8331
CONTACT SAMCO AGRI SALES
OPENING HOURS
Monday – Friday 9am to 5pm
